Synology DS213j won’t Reboot While Updating? Let’s Fix It!
Like all other devices, a Synology NAS also reboots at the end of an update. If your Synology NAS does not reboot at that particular part, it is a matter of concern. This blog will help you understand the reason behind this problem and help you resolve it. For easy understanding, we have taken an example of DS213J NAS.
Why Your Synology DS213j won’t Reboot While Updating?
When the NAS does not restart during an update, it means that the update has been failed to install. This generally happens when the NAS is powered down or disconnected from the internet during the process. Apart from this, incompatible version can also cause this issue.
Know that when the update fails, the Status of your NAS will be inactive when you check it via find synology nas login address. Now, let’s find out what can be done to fix the issue.
Solutions: Synology NAS won’t Restart During Update
If your NAS does not reboot during an update, we recommend you restart it manually and update it once again. To reboot, unplug the power connector of the adapter from the outlet and wait for a few minutes. Plug the NAS back into outlet and update it once again. Be sure that you upload the compatible file. Pay attention on the extension of the file especially. Now, see if the NAS restarts automatically at the end of the update.
If your NAS does not reboot during an update, we recommend you restart it manually and update it once again. To reboot, unplug the power connector of the adapter from the outlet and wait for a few minutes. Plug the NAS back into outlet and update it once again. Be sure that you upload the compatible file. Pay attention on the extension of the file especially. Now, see if the NAS restarts automatically at the end of the update.
- Go to Synology Download Center and download the PAT file for your Synology NAS.
- This file does not need to be unzipped or executed in your PC.
- The next step is to access the Control Panel of your Synology DSM DS213j.
- Here, follow this path to locate the PAT file:
- Control Panel > Update and Restore
- Select Browse.
- Find the file in your computer and install it.
- The NAS will be updated and hence reboot as soon as the process completes.
Still, Synology NAS won’t Reboot During Update?
- Remove the extra memory you’ve installed on your NAS.
- Bad sectors in the Hard Disk Drive might be causing this problem. We recommend you check HDD. For that, connect it to your PC and use the HDD tool to check the drive. If the hard disk failure is there, you should replace it. You can use the following tools to test the drive:
- WD HDD: Lifeguard
- Seagate HDD: Seatool
- Hitachi HDD: Drive Fitness Test
- Toshiba HDD: Diagnostic Tool
- Perhaps the system installation volume is small which prevented unzipping of the update file.
- You should upgrade the volume for that.
Above all, ensure that the internet connection is working fine and that you have connected the PC as well as your NAS device to the same network.
The Concluding Thought
If your Synology DS213j won’t reboot during update, then you need to update it manually as rebooting failure means that the NAS hasn’t installed complete updates. It is expected that after walking through the information shared in the post, you will be able to address the NAS update failure problem with ease.