DS213J Status Light Flashing Orange [Troubleshooting Fixes]
Synology DiskStation DS213j is a completely budget-friendly storage server that fits well in homes or offices. It has multiple features to facilitate data storage and management. However, the device also has some lights on it that reveal whether everything is in shape or not. This light indicator, at times, flashes orange. If you’re facing a similar issue with your NAS system, read this post to learn solutions.
Meaning: DS213J Status Light Flashing Orange
There can be two meanings behind your NAS device flashing orange. It means either the NAS volume has degraded or crashed. It also indicates that there is no volume available on your Synology DS213J DiskStation. However, if this light is stable orange, you should know that the available volume space is less than 1 GB or 1%.
How to Fix DS213J Status Light Flashing Orange?
If the Status light on your NAS is flashing orange, it is recommended that you check the NAS status through the Synology Assistant or by accessing the Synology login URL. Here’s how you can do it via the Synology Assistant.
- First of all, go to Synology Download Center on a web browser and select the model number of NAS i.e. DS213J. After that, go to Desktop Utilities. Install the Synology Assistant for your NAS.
- Now, launch the Synology Assistant and find the NAS. If the NAS is not found, try checking the cable connections and restarting your NAS. The cables in use must be intact and properly plugged in. If the DS213J Status light is still blinking orange, you should try the next solutions.
- The table given below will help you understand the NAS statuses in the Synology Assistant and their respective solutions to fix the orange light.
NAS Status | Solution |
---|---|
DSM Not Installed | First of all, retrieve the data from all the drives and continue installing your NAS after that. This is because you might lose data if you continue installing NAS without taking backup. |
Configuration Lost | This happens when the system partition fails or you have triggered the Mode 2 reset. In that case, reset your NAS properly and install it again. Plus, be sure that the NAS button has not malfunctioned. |
Migratable/Recoverable | Re-installation of DSM is required in this case. To install DSM, either follow the instructions appearing on the Synology Assistant tool or use the find.synology.nas URL. Nothing will be lost in this case. |
Ready |
|
In this way, you can fix the DS213J Status light flashing orange. If the issue persists, reset the NAS by pressing the Reset button until you hear a beep. When the NAS resets, you can set it up again using the Synology Assistant or the login address. To access the NAS remotely, you can use quickconnect.to after the setup process.
The Final Thoughts
This was all about how to fix Synology DS213J Status light flashing orange issue. Hopefully, you will be able to change the NAS working status with the help of the tips given in the post.